Connecting buyers with
“Chinese crane manufacturers”
logo-img

Dongqi 5t Double Girder Gantry Crane 12m Lift Steel Yard Low Price Costa Rica

$28800.00
1 set
Qingdao Shanghai
L/C T/T
New
MGO
CE, ISO9001:2000
Dongqi
General manufacturing,Metal production industry,Renewable energy industry,Paper and wood industry,Power Industry

The MGO model European-spec double girder gantry crane from Dongqi Crane is developed with the new NRT European-spec electric crab hoist as its lifting mechanism. It delivers superior performance, safety and reliability, energy saving and high efficiency, low noise and environmental protection—the defining characteristics of the European-spec crane family applied to a heavy-duty, self-supporting gantry platform.

The MGO is the correct lifting solution for workshops, warehouses, power stations, and similar facilities where bridge cranes cannot be installed. It is also the right choice where the lifting duty demands larger capacity, wider span, and continuous operation than a single girder gantry can economically provide.

The double girder gantry crane with larger lifting capacity can do most of the work, indoor and outdoor. For indoor use, it serves workshops, warehouses, factories, and production lines for material handling. For outdoor use, it functions as the main lifting equipment with special lifting tools for goods loading and unloading, stone transfer, material handling, steel yards, mines, concrete industries, ports, and shipbuilding.

Design is based on FEM / DIN standards, with a compact structure and small limiting dimensions that make efficient use of available space.

Why Double Girder Gantry: When Single Girder Reaches Its Limit

A single girder gantry is economical and sufficient for many light-to-medium duties. But as capacity, span, and duty cycle increase, the single girder configuration reaches structural and operational limits. The MGO double girder design addresses these limits directly:

  • Higher capacity and wider span — the twin-girder frame distributes load across two beams, supporting capacities up to 300 t and spans up to 35 m .

  • Crab hoist between girders — the NRT crab hoist runs between the two main girders, producing greater hook height than a single girder gantry of comparable rail elevation, and providing a more stable load path under heavy cycling.

  • Auxiliary hoist capability — the double girder structure supports main and auxiliary hoists on the same trolley, enabling fast main lifting and precise auxiliary positioning in heavy fabrication and steel handling .

  • Outdoor duty — the self-supporting legs and ground beams transfer load directly to the rail foundation, making the MGO independent of building structure and suitable for yards, ports, and shipyards.

The MGO does not replace the single girder gantry; it extends the gantry concept into the capacity and duty range where a single girder would be over-stressed or operationally limited.

Technical Specifications

ParameterMGO Double Girder Gantry Crane
Product nameDouble Girder Gantry Crane
ModelMGO
ManufacturerDongqi Crane
Design standardFEM / DIN
Working classA5–A7 (medium to heavy duty)
Capacity5–300 t (standard range; higher capacities reviewed)
Span3–35 m (standard catalogue 10–35 m; extended spans reviewed)
Lifting height6 / 9 / 12 / 15 / 18 m (custom heights available)
Girder designDouble box-type welded girder
Lifting mechanismNRT European-spec electric crab hoist
Power supply220–660 V, 50/60 Hz, 3-phase
Working temperature−20 °C to +40 °C
Control methodPendant / remote / cabin control available
Travel controlVFD available for hoisting, trolley travel, and long travel
CoatingShot-blasted to Sa2.5, epoxy zinc-rich primer, protective topcoat


Capacity and span note. The MGO platform is available from 5 t to 300 t, with standard catalogue spans beginning at 10 m and extending to 35 m . For spans below 10 m or capacities approaching the upper limit, Dongqi reviews the leg structure, rail foundation, and wheel load together. The user-specified 3–35 m span range represents the broader engineering envelope; standard configurations begin at 10 m.

Design and Construction

Main girder and gantry structure

The main girders are welded box-section beams fabricated from Q235B steel (Q345B optional), with three-layer painting. For coastal or corrosive environments, anti-corrosion epoxy zinc-rich paint can be added . Steel plates are shot-blasted to Sa2.5 before fabrication, and main welds are inspected by ultrasonic and X-ray non-destructive testing .

The gantry legs and ground beams complete the self-supporting structure, transferring load to the rail foundation rather than the building. The end carriages are equipped with forged carbon steel wheels manufactured in-house, with vacuum casting and intermediate quenching for wear resistance .

NRT electric crab hoist

The NRT electric crab hoist serves as the lifting mechanism, mounted between the two main girders. The crab configuration places the hoist and trolley on a dedicated frame that runs on rails atop or between the girders, providing greater hook height and more stable load distribution than a single girder trolley arrangement.

The hoist system uses modular design to FEM/DIN standards, with light weight and compact low headroom to increase vertical space utilization .

Drive and control

The crane travel mechanism uses a three-in-one drive (motor, brake, reducer integrated), with protection class IP54 and insulation class F. Motors are equipped with overheat alarm and aluminum alloy housings for heat dissipation . Frequency conversion is available for hoisting, trolley travel, and long travel, providing stable operation with stepless speed regulation, soft start/stop, and reduced load swing. The integrated transmission design reduces wear points and contributes to energy saving and high efficiency.

The silent drive characteristic of the European-spec platform lowers equipment noise, supporting low noise and environmental protection in the working area.

Lightweight performance

The MGO’s European-spec design delivers measurable advantages over traditional double girder gantry cranes:

MetricMGO Advantage
Overall height20–25% lower than traditional cranes
Self-weight20–30% lighter
Maximum wheel pressure15–20% lower


These reductions translate directly into lower rail foundation requirements and reduced civil works for outdoor yards and new facilities.

Safety and Protection

The MGO gantry crane is supplied with a comprehensive protection set configured to the working conditions:

  • Overload limiter — prevents lifting beyond rated capacity, with alarm and control circuit cut-off; accuracy ±3% .

  • Height limiter — limits upper and lower hook travel.

  • Stroke limiter — limits trolley and long-travel motion at extremities.

  • Photoelectric limiter — anti-collision protection between cranes or end approaches, where specified.

  • Phase sequence protection — protects motors from incorrect phase connection.

  • Emergency stop — immediate power isolation at the operator interface.

  • Buffers and anti-derailment devices — at travel extremities and end beams.

  • Crane black box (optional) — recorded analysis functions for operating data, added based on customer requirements.

Customized cranes can be produced to suit specific span, capacity, lifting height, control, and environmental requirements beyond the standard catalogue.

Control Options

The MGO supports flexible control configurations:

  • Pendant control — suspended station for ground-level operation.

  • Remote control — wireless operation for flexible positioning and improved visibility during load handling.

  • Cabin control — available for larger spans or where an operator station is preferred, with capsule cab and broad vision as an option .

Applications

The MGO double girder gantry crane is suitable for lifting and handling objects in workshops, warehouses, power stations, and similar places where bridge cranes cannot be installed. Its larger capacity and double girder stability extend its reach to:

Indoor applications

  • Workshops and production lines — material handling where roof-mounted runways are impractical or unavailable.

  • Warehouses and logistics centers — loading, unloading, and stacking in buildings not designed for bridge cranes.

  • Power stations — maintenance lifting and auxiliary material handling.

Outdoor applications

  • Steel yards and steel plants — billet, slab, and coil handling; scrap processing with electromagnetic or grab attachments .

  • Ports and shipbuilding — main lifting equipment for goods loading/unloading and shipyard material handling.

  • Mines and concrete industries — stone transfer and precast concrete handling.

  • Precast concrete yards and heavy fabrication — lifting of forms, structures, and heavy components .

The MGO is particularly appropriate for facilities that need heavy-duty gantry capability without the civil works and structural requirements of a bridge crane runway, and where a single girder gantry would be capacity- or span-limited.

Selection Guidance

Application conditionRecommended MGO direction
Capacity above single girder gantry range, span up to 35 mMGO double girder, A5–A7, NRT crab hoist
Outdoor yard, port, shipyard, steel plantMGO with enhanced coating, rail clamps, windproof devices
Heavy fabrication or steel coil handlingMGO with auxiliary hoist and specialized lifting tools
Need smooth starts/stops and precise positioningMGO with VFD on hoisting and travel
Corrosive or coastal environmentMGO with anti-corrosion epoxy zinc-rich paint system
Multiple cranes on the same rail systemMGO with photoelectric anti-collision limiter
Span below 10 m or non-standard capacityCustomized MGO — review leg structure and rail foundation with Dongqi


Dongqi reviews span, capacity, rail foundation condition, lifting height, duty cycle, and environment together rather than quoting a gantry crane on capacity alone. The leg structure and rail system are designed as part of the crane, not as an afterthought.

Manufacturer: Dongqi Crane

Dongqi Crane designs and manufactures the MGO double girder gantry crane as a FEM/DIN-based European-spec lifting system, integrating the double box-type girders, gantry legs, NRT crab hoist, and electrical controls as a matched solution. Dongqi’s MGO platform has been applied in steel plants, precast concrete facilities, outdoor yards, and heavy manufacturing, including a recent delivery of a customized 55-ton European double girder gantry crane for a heavy manufacturing customer . Customized configurations are available for specific span, capacity, and environmental requirements.

Request a Configuration

To receive a matched MGO gantry crane proposal from Dongqi Crane, please provide:

  1. Capacity required (t, standard 5–300 t)

  2. Span (m, center-to-center of rails)

  3. Lifting height (m, hook travel required)

  4. Rail condition (existing or new; foundation type; rail gauge)

  5. Working environment (indoor/outdoor, temperature, dust, corrosion, wind)

  6. Duty cycle (hours per day, shifts, load spectrum)

  7. Control preference (pendant, remote, cabin)

  8. Whether an auxiliary hoist or special lifting tools are required

  9. Any special requirement requiring a customized crane


Contact Supplier

Subject:
Name:
From:
Phone:

LINKS : Dongqi Crane