Lx Model Suspension Strong Box Type Single Girder Overhead Bridge Crane

Lx Model Suspension Strong Box Type Single Girder Overhead Bridge Crane

Product details
Single beam bridge crane is currently the most widely used lifting equipment for overhead material handling, mainly used in indoor and outdoor warehouses, workshops, docks, workshops and open-air storage yards, etc. It is a kind of bridge crane running on the elevated track, the bridge runs longitudinally along the track laid on both sides of the elevated track, and the lifting trolley runs horizontally along the track laid on the bridge. Form a rectangular working range, can make full use of the space under the bridge to lift materials, not hindered by ground equipment.

Bridge crane features:
1. High efficiency with smooth and silent running.
2. Suitable for high lifting capacities and heavy duty class
3. Minimum investment requirements for maximum space optimization
4. Safe and smooth running with safety accessories
5. Reasonable, compact and beautiful structure
6. Smooth starting and stopping performance
7. Low noise, commodious cabin and good view space
8. Maintenance-free for lifting mechanism and excellent changeability for spare parts
9. Energy saving with minimum possible power
10. All electric parts from world famous brands
11. 2 years spare parts to avoid any delays once breaking down occurs
12. Suitable for industry power supply around the world
13. Precise and experienced designing to save each coin for clients
14. Overloading, over-volt, over-current protections included to ensure 100% safety
15. Accurate designing and advanced device to guarantee synchronous running in each side

Other Accessory

Used together with CD1  model MD1 model electric hoist as a complete set, it is a light duty crane with a capacity 0.5 ton ~ 32ton. The span is 7.5m~ 22.5m. Working duty is A3~A5, working temperature is -25-40ºC. 
 

Electric crane: low headroom, smooth operation, accurate positioning

1,Q355B Steel material (ISO EN S355,DIN ST52,ASTM A572 Class 50)

2,Welding specifications follow ISO 15614,AWS D14.1, and the deflection can be from 1/700 to 1/1000

3,Fillet welds require MT or PT and joint welds require UT