Lifting machinery periodic inspection report form
The lifting machinery used by the enterprise shall be inspected regularly and recorded in the form according to the regulations. The editor will introduce a collected periodic inspection form for your reference.
This form is compiled with reference to “TSG Q7015-2008 Periodic Inspection Rules for Lifting Machinery “.
| Serial number | Inspection items and content | test result | test results | Remark | ||||||||
| 1 | Technical document review | (1) Periodic inspection reports and usage records | ||||||||||
| 2 | (2) Effective proof of lightning protection system | |||||||||||
| 3 | Inspection of main parts | General condition (wear, deformation, defect) | ||||||||||
| 4 | Spreader | (1) The suspension of the spreader | ||||||||||
| 5 | (2) Anti-decoupling device of hook | |||||||||||
| 6 | (3) Hook welding repair, cast crane hook mouth wear protection saddle | |||||||||||
| 7 | (4) Explosion-proof crane hook measures to prevent the hook from impact or friction | |||||||||||
| 8 | Wire rope | Wire rope configuration | (1) Wire rope matching | |||||||||
| 9 | (2) Lifting hot and molten metal wire rope and its production license | |||||||||||
| 10 | (3) Explosion-proof crane to prevent the wire rope from slipping off the groove device | |||||||||||
| 11 | Wire rope fixation | (1) The wire rope end is fixed | ||||||||||
| 12 | (2) Rope end fixing device on the reel | |||||||||||
| 13 | (3) metal pressed and fixed joints | |||||||||||
| 14 | (4) Wedge sleeves and wedges fixed by the wedge | |||||||||||
| 15 | (5) Installation and number of rope clamps when the rope clamp is fixed | |||||||||||
| 16 | Scrap of wire rope | (1) The number of broken wires in the wire rope for hoisting machinery for lifting hot metal, molten metal or dangerous goods | ||||||||||
| 17 | (2) Broken wire of explosion-proof crane wire rope | |||||||||||
| 18 | Pulley (casting crane) | |||||||||||
| 19 | Rope guide | |||||||||||
| 20 | Electrical and control system inspection | Electrical equipment and control functions | (1) Electrical equipment and control functions | |||||||||
| twenty one | (2) metallurgical, explosion-proof, and insulated crane electrical equipment and its components | |||||||||||
| twenty two | ||||||||||||
| twenty three | Short circuit protection of the main power circuit | |||||||||||
| twenty four | Control power supply for the button panel | (1) Control power supply safety voltage, button function | ||||||||||
| 25 | (2) The control cable support rope of the portable operation button panel | |||||||||||
| 26 | Safety protection and protective device inspection | Brake | Brake setting | |||||||||
| 27 | Brake usage | (1) Brake component defects, hydraulic brake oil leakage phenomenon | ||||||||||
| 28 | (2) The friction, defects and oil pollution of the brake wheel and the friction plate | |||||||||||
| 29 | (3) Brake adjustment and braking conditions | |||||||||||
| 30 | (4) Oil leakage of brake pusher | |||||||||||
| 31 | Lifting height (descent depth) limiter | (1) Lifting height limiter | ||||||||||
| 32 | (2) Lifting height limiter of hot and molten metal lifting mechanism | |||||||||||
| 33 | (3) Tower and portal crane descending depth limiter | |||||||||||
| 34 | Lifting weight limiter | (1) Settings | ||||||||||
| 35 | (2) Test | |||||||||||
| 36 | Buffer and stop device | |||||||||||
| 37 | Emergency power switch | |||||||||||
| 38 | Performance test | No-load test | (1) Running and braking conditions | |||||||||
| 39 | (2) Operating conditions of the control system and electrical control system | |||||||||||
| 40 | (3) Rail gnawing phenomenon running along the full length of the track | |||||||||||
| 41 | (4) Working conditions of various safety devices | |||||||||||
| Inspection: Date: | Inspection: Audit: | |||||||||||