5-15 Ton Heavy Duty Electric Hoist | Low Headroom Design | Reliable Braking

 CD MD electric hoist with remote controller
Description:

Electric hoist is a kind of common use small hoisting machinery, electric drive and run the car can also be along the line I beam orbit or curved track lifting and transporting goods, so the electric hoist is often used as a single girder bridge crane, gantry crane and jib crane lifting device.There are many kinds of electric calabash, according to the flexible parts,there are wire rope and ring chain;Depending on the speed of ascension, there are regular and slow points;According to the working environment, there are general, heavy, explosion-proof and anti-corrosion.
Since the electric hoist is light and mobile, it can be used in the construction site, equipment overhaul and other places


USAGE:

Electric hoist is a kind of common use small hoisting machinery, electric drive and run the car can also be along the line I beam orbit or curved track lifting and transporting goods, so the electric hoist is often used as a single girder bridge crane, gantry crane and jib crane lifting device.

The most widely used is CD - type constant speed wire rope electric hoist and MD type slow wire rope electric hoist.
MD has a slow and constant speed, and when it works at slow speed (or micro-speed), it can meet the requirements of installation, positioning and other fine work, and is more widely used

FAQ:
wire rope electric hoist
1.Is your products customized?
Yes, because the working condition are different, all our products are customized depending on detail requirement! So if you give us more information about the lift capacity, span, lift height, power source and other specials, we will give you a very quick quote!
 
2.What's the information should I provide when inquiry?
Thanks for your question. The more information you provide, the accurate solution we can prepare for you!
 The information such as the lift capacity, control mode, lift height, power source or other specials demand of you need .
 
3.How many operating methods for my selection?
Thanks for your question.
Meanwhile, we can also provide the remote control with push buttons and pendent control with buttons .You can choose any of them, just tell us!
 
4.What's the max lifting capacity of this electric hoist?
Thanks for your question. The max. Lifting capacity of CD electric hoist is 30 ton.
If this can't satisfy your working requirement.please contact us , We can suggest you choose other model.
 
5.The space of my workshop is limited, can the electric hoist ok for mine?
Thanks for your question. For low headroom workshop, we have the Special products. The detail dimension please consult our professional engineer.
 
6.Can this type work in hazardous environment?
Thanks for your question. CD and MD electric hoist is just for application in general manufacturing workshop.
If electric hoist for hazardous environment, please consult our professional sales manager.
 
7.Do your side can provide other lift tools?
Thanks for your question. Yes, we can provide any kinds of lift tools such as lift sling belt, lift clamp, grab, magnet or other specials as your requirement!

 electric hoist parameter:
1.     Reducer
 Third-class dead axel helica gear transmission structure is adopted,; gear and gear axel are made of heat treated alloy steel;case and case cover with precise assembly and good seal are made of quality cast iron.The reducer is independent, so its easy to load and unload it.
2.    Control Box
  It has device with up an down stroke protection of break off limiter and can cut off main circuit in an emergency,which ensures safe operation of electric block.Electric elements are of long service life and operational safety.
3.       Steel Wire Rope
 It uses GB1102-74(6*37+1) hoist steel wire rope which is durable in use.
4.    Conical Motor
  The hoist motor uses conical motors of relatively stronger starting torque to brake asynchronous motor and does not need extra arrester. The motor s load duration factor is 25%; the motor uses B grade and F grade insulation and its grade of protection is IP44/IP54.
5.    Button Switch
  Its hand-operated, easy to handle,and has two modes of cord operation and cordless remote control
 6. Hooks
Load hooks are heat treated and fracture resistant. In case of dangerous overloading or abuse, the hook does not fracture but will slowly yield.
7. Power
Operating voltage 220-440V, 50/60Hz, 1-3 phase.
Low voltage control 36V is standard.
 High efficient energy-saving motor, asbestos free brake system. 2-speed motor available.
Sturdy pole change motors with cylindrical rotors and integrated safety brakes.
 8. Limit Switch
Limit switch devices fitted at both top & bottom ends, switch off power automatically to prevent load chain from running out.
 9. Pushbutton Swith
Pushbutton swith is rain-proof plastic for severe impact and corrosive atmosphere resistance and mechanically interlocked.
10. Hoisting Gear:
 Lightweight gear units with silent running flat bevelled gears deliver the torque required.