* Sheel:
1. The Maxload Electric Chain Hoist is made of light aluminum alloy shell, light but hard.
2. With cooling fin, easy and quick Bring the Heat out.
* Break System:
1. Side Magnetic Braking Device, Ensure lock the hoist
2. Mechanical braker, Dual braking system, much more safety.
* Limit Switch:
With up & down Limit Switch, to prohibit the chains from exceeding for safety.
* Chain:
FEC G80 Chain, Origina imported from Japan. Anti-Rust and Anti-corrosion
* Electromagnetic contactor:
1. With Schneider Electric (TESSIC), can be used safely under high frequency.
2. Can be installed Variable-Vrequency Drive (VFD Electric) Can be suitable for Singlle Phase Power supply.
* Inverse phase sequence protecting device:
It is sepcial electrical installation which controls the circuit not to work in case of wiring error in the power supply.
* Gear:
The gear made of alloy steel, Through the heat treatment.
* Level of Protection Grade(IP Grade):
1. Hoist IP Grade: IP54
2. Push Buttom IP Grade: IP65
* Power supply:
All kinds of voltage can be custom-made. 200V-660V, 50HZ/60HZ, 1P/3P
| Technical Specification | ||
| 1t Electric Chain Hoist With Monorail Trolley Type - HHBB01-01SS | ||
| Model | HHBB01-01SS | |
| Capacity(t) | 1 | |
| Standard Lifting Height(m) | 3 | |
| Lifting Speed(m/min) | 6.6 | |
| Lifting Motor | Power(kw) | 1.5 |
| Rotation Speed(r/min) | 1440 | |
| Phases | 3 | |
| Voltage(v) | 200-660 | |
| Frequency(Hz) | 50/60 | |
| Operating Motor (Electric Trolley Type) | Power(kw) | 0.4 |
| Rotation Speed(r/min) | 1440 | |
| Operating Speed(m/min) | 11/21 | |
| Phases | 3 | |
| Volatge(v) | 200-660 | |
| Frequency(Hz) | 50/60 | |
| Load Chain Falls | 1 | |
| Chain Specification | Ø7.1 | |
| Test Load(t) | 1.25 | |
| Weight(kg) | 61 | |
| I-Beam(mm) (Electric Trolley Type) | 58-153 | |
| Chain Add Weight Per Meter(Kgs) | 1.1 | |
LINKS : Dongqi Crane